Float Power Systems & Controls
Services/Clients/List of Equipments
Engineering Services offered for Electrical Power Distribution System of Industrial Plants
Greater complexity of today’s power system network brings greater challenges and if proper care is not taken, the possibility of greater problems. This mandates excellence in testing of installed equipment. We provide the full range of services involved in the TESTING AND COMMISSIONING stage during start-up of the plant.
The construction and general arrangement of electrical equipment ensures safe and efficient operation under normal running conditions, but, if they are not looked after properly and maintained periodically, conditions may arise in the course of normal usage to render even the safest equipment a menace to persons and property, keeping which in mind, proper maintenance of electrical equipment, adequate planning of maintenance, and HIGH QUALITY OF MAINTENANCE are of prime importance. Over a period, electrical system equipment as well as technology becomes obsolete and it is necessary to replace the whole equipment or part of it to keep pace with the latest technology and our PLANT BETTERMENT SERVICES look after such things.
For any electrical distribution system, the operation of protective relays and schemes is vital when the situation calls for, as protective gear is solely concerned with fault conditions, and cannot therefore readily be tested under normal system operating conditions. It is therefore essential that commissioning tests using SECONDARY AS WELL AS PRIMARY INJECTION OF PROTECTIVE RELAYS and system and periodic servicing and maintenance of these relays be carried out meticulously and systematically. If any relay is found to be having Major Defects, requiring replacement of damaged component or rewiring of internal circuits or detailed fault finding test of static circuits, it needs to be repaired as and when required. We offer these POWER SYSTEM PROTECTION SERVICES (viz. relay testing, by primary and secondary injection) including repairing of faulty relays to ascertain the accuracy of operation of installed equipment.
TESTING AND COMMISSIONING SERVICES
Prior to commissioning of the electrical equipment, the pre - commissioning tests are required to be performed on the equipment. These tests may be a repetition of the tests carried out at manufacturer’s works to determine that the equipment supplied is in accordance with the specifications.
The pre-commissioning tests and subsequently testing and commissioning of electrical system equipments for following areas are taken up on a complete package basis also.
Pre - commissioning tests and checks for electrical distribution system like HT/LT Switch gears, Motor Control Centers, Distribution Transformers, HT/LT bus duct, HT Cables and other electrical equipments as per the design and specifications. OUTDOOR SWITCH YARD Pre - commissioning tests and checks for outdoor switch yard equipments such as power & distribution transformers, circuit breaker, CT, PT, earthing installations, relay and control panels, HT bus duct, cables and other electrical equipments as per the design and requirement of system.
PLANT BETTERMENT SERVICES
Maintenance, Overhauling and Testing of HT indoor switch gears.
Modification, Renovation and Revamping of HT indoor switch gears.
Preventive Maintenance and Testing of outdoor switch yard electrical system
POWER SYSTEM PROTECTION–SPECIALIZED SERVICES
Application and selection of protective relays.
Design and detailed engineering of protective relaying schemes.
Power system analysis, relay setting and protection co-ordination.
Inspection, servicing, testing and calibration including minor repairs of protective relays and measuring instruments (ammeter, voltmeter, frequency meter, etc.) at site.
Minor repairing at site at the time of testing and major repairing, testing and calibration using manufacturers proprietary spares of relays at our service center.
Testing of protective relaying schemes for sensitivity and stability.
Oil & Gas Sector
Reliance Industries Ltd
JP Cement Ltd
Shree Cement Ltd
Binani Cement Ltd
Birla Cement Ltd
Satna Cement Works
Sanghi Cement Ltd
Binani Cement Ltd
Shree Digvijay Cement Co Ltd
Metal Sector Govt & PSU' s
Steelco Gujarat Ltd
Hindalco Industries Ltd
Heavy Water Plant
Chemical & Other Industries Contractors / OEM' s
PI Industries Ltd
JK Papers Ltd
Cheminova India Ltd
Aquagel Chemicals Pvt Ltd
Apar Industries Ltd (Eliokem)
Transpek Silox Industries Ltd
Metrochem Industries Ltd
L & T Ltd
Rohini Industrial Electricals Ltd
(Now Voltas Ltd)
Baroda Electricals & Telecom
Fertilizer, Power & Pharmaceutical Sector
Cadila Healthcare Ltd
Glaxo SmithKline Ltd
List Of Testing Equipment
Quantity In Nos.
Microprocessor Based Relay Test Set T1000, ISA make
Secondary Injection Current Testing Kit, CFB, 0-200 A
Secondary Injection Current Testing Kit, 0 - 100 A
Primary Injection Current Testing Kit, 0 - 2000 A
Primary Injection Current Testing Kit, 0 - 1200 A
Combined Variable AC/DC Voltage Source, 0 - 250 V
Variable AC Voltage Source, 0 - 1000 V (Single Phase)
Variable AC Voltage Source, 0 - 440 V (Three Phase)
DC High Voltage Testing Set, 0 - 60 Kv
DC High Voltage Testing Set, 0 - 30 kV
AC High Voltage Testing Set, 0 - 30 kV
Cable Fault Locator Test Set, Up to 5 kV
Cable Fault Locator Test Set, Up to 12 kV
Tan Delta Test Set
Variable Frequency Source, 40 - 70 Hz, 0 - 250 V
Phase Shifter, 3 x 415/110 V, 150 VA, 0 - 360 degrees
Phase Angle Meter, 0 - 360 degrees
Digital Time Interval Meter, 0.01 mS - 1000 S, Pla
Circuit Breaker Close-Open Time Measurement Kit, SCOPE
Contact Resistance Measurement Kit, CRM 100, SCOPE
Digital Multi Meter, Fluke, Kyoritsu, MECO
Leakage Current Tester, MEGGER
Clamp-on Meter, 0 - 1000 & 0 - 2000 A AC/DC
Insulation Resistance Tester, 1 Kv
Motorised Insulation Resistance Tester, 2.5/5 kV
Insulation Resistance Tester, 2.5/5 kV
Earth Resistance Meter
Micro Ohm Meter
AC Ampere Meter
Notes: Property of System Protection
FLOAT POWER SYSTEMS & CONTROLS © 2010